Car booty – 05/05/2013

Today we were planning to go to the Sayers Common car boot sale, which doesn’t open for buyers until 10am.

By some miraculous accident we were ready to go long before that, so we decided that rather than killing an hour we’d go to Pease Pottage instead.

It seemed busier than last time and we had to park in the second to last row of cars, which  came in handy when it was time to go!

Brace

  • Brace – £4

I’ve been looking for a brace for a while, but I’ve been put off by the chucks most of the ones I’ve seen, which only seem to have two semi-circular jaws.

I’m not sure whether this is a Franken-brace, but it has a 3 jaw chuck which will require a chuck key.

The chuck is mounted in a square taper and fixed by a small bolt with a hex socket in one end:

Brace chuck

The handle seems to be two pieces held together with nails:

Brace handle

My next find was a heavy one which necessitated a trip back to the car:

Hand drill press

  • Hand drill press – £4

I have no need for such a thing, but I was interested by it and felt I’d like to clean it up and see if I can get the chuck unfrozen (it seems to be stuck in the fully closed position).

The only obvious marking is a “British Made” sticker on the red gear.

Hand drill pressHand drill press

Cranking the handle seems to just turn the chuck for a while, then something happens and the chuck is propelled towards the table by a thread at the top of the drill:

Hand drill press mechanism Hand drill press mechanism

I’m not sure whether this is meant to happen, so I’ll have to do a bit of Googling …

The table has a small “smile of shame”:

Hand drill press table

Both the flywheel and the chuck seem to be attached on/to threaded parts of the column

Hand drill press flywheel Hand drill press chuck

I’ve taken the chuck off and it looks like there is a screw loose inside it which may be intended to lock it to the end of the threaded rod.

Despite it not working I think this is my favourite find of the day.

I’ve been looking for any information on what make it is and how it works, but all I’ve turned up so far is this one on eBay for £40

If anyone knows the make and model, or has any information on servicing the drill then please get in touch!

Edit 05/05/2013: I found this post by Bugbear on UKWorkshop, which explains how the advance mechanism works.

My next find was three screwdrivers, one of which is quite badly bent

Three screwdrivers

  • Three screwdrivers – 80p

The medium sized one is a Marples cross ground:

Marples screwdriver Marples screwdriver

I’ll straighten the bent one and may turn the smaller one into an awl.

Next up was arguably my best value purchase – 6 items for a pound!

Chisels and screwdrivers

  • Two chisels, screwdriver, awl etc – £1

The screwdriver is another Marples crossground – a bit rusty and in need of a regrind:

Marples screwdriver

The awl is square section and has a marking on the handle which I think may be Marples:

Marples square awl

Both chisels have seen better days and could do with new handles.

The first is marked:

F G Pearson
Sheffield
Cast Steel
1917

It is 1 1/4” wide and not too badly rusted.

F G Pearson chisel F G Pearson chisel

It desperately needs a new handle:

F G Pearson chisel

The other is 1″ wide and marked:

1932
A Crooke & Co
Sheffield
G.P.O
Warranted
Cast Steel

It also has a logo with “TIP” and a picture of (presumably) a diamond

A Crooke chisel A Crooke chisel

I seem to be amassing a small collection of ex-G.P.O. tools and my collector gene is twitching!

Also in this lot is a nail puller and something I think may be a screwdriver for split nuts on saws:

Split nut screwdriver

Next up was a curved spokeshave:

Curved spokeshave

  • Curved spokeshave – £1

This seems to have a Record blade in it but I’m not sure whether the actual body is a Record.

Edited 07/06/2013: I only just noticed this has an adjustable mouth. It may be a Stanley No. 53

Curved spokeshave

I’m not convinced that square washer is original either …

Curved spokeshave

My final tool purchase was a little screwdriver:

Small screwdriver

  • Small screwdriver – 20p

I just liked the shape and feel of the handle. I may turn this into an awl or regrind it.

As well as the tools I got:

As usual getting out of the carpark was a bit of a nightmare, but we at least discovered a way home through the backroads which bypassed most of the queue back to the A23

  • Admission: £1 (2 adults, children free)
  • Total tool spend: £11
  • Total other spend: £27.80
  • Grand total: £39.80
This entry was posted in Car booty, Hand tools, Machinery, Purchases, Restoration, Tools and tagged , , , , , , , , , , , , , , , , , , , , , , , , , . Bookmark the permalink.

3 Responses to Car booty – 05/05/2013

  1. Mark says:

    Hand Drill Press – Im sure you have worked it out by now but you hold the top fly wheel just to start the drill descending – when it the drill meets resistance (-ie. metal you intend to make a hole in) the fly wheel will spin – the action is a bit like slipping a clutch) – just drill a hole in a bit of steel and you will see what i mean! – chuck will just screw off – tap the 3 jaws back – as with most old chucks I find its just hardened grease restricting their movement – bargain at £4! When I need to drill a small hole I go straight for this machine – rather than my big tailed version!

  2. Pingback: Fixing my hand pillar drill – Part 1 | Aggravated Wood Butchery

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s